Intelligent Vacuum Cleaner

  • $239.99


I never thought that one day much of the housework would be automated, but with this

Intelligent Robotic Vacuum Cleaner help make things in the home even more automated. This quiet 2-in-1 robotic vacuum is controlled by a simple and very handy remote control.

Main Features:

Automatic cleaning for home and office
Large cleaning area: 150 - 180 square meters
2 in 1 dry and wet cleaning modes
It can meet your different needs, you can choose the dry or wet mop
Anti-collision system
It can better protect the furniture
Intelligent drop avoidance induction
IR sensors at the bottom detect the high gap, avoid dropping. The robot can avoid the obstacles and change direction automatically by its inductor
Daily / schedule cleaning plan available
Set the start time, and make the cleaning schedule at the fixed time even you are not in home
OBS sensors, 1 set wall sensor, 5 IR receivers on the body
This robot vacuum cleaner can recognize the barrier and avoid collision
Timing function
You can set up time to clean the room
0.3L water tank capacity design
Self-help ooze water design, it can continuously work for 120 - 150min
70mm slim design
This cleaner can work in the narrow places, it is possible to clean the area under furniture and the corner
Low noise design
The noise is less than 50dB, easy to help you solve the noise problem
850Pa strong suction
Easy to absorb dust, hair, paper, reduce the pollution of PM2.5
Three cleaning routes
Automatic cleaning, spot cleaning, edge cleaning
Two charging modes
Automatic charging, manual charging

Remote Control:

Directional Buttons – These are used to force the vacuum to change direction. Even though it moves on its own, sometimes you may want it to go to a specific area or don’t want it in a specific area. In this case it’s probably best to block off the area, but if you’re going to be around, you can use these to direct it away.

Clean Button – This button has a few functions – mainly, pressing it while the vacuum is in the Charging Home Base starts the “Auto Cleaning” mode. While the vacuum is cleaning, you can press this to temporarily stop it from cleaning and then press it again to start back. If you stop it for too long it will go into sleep mode; in that case, pressing this again will wake up the vacuum, and one final press will start the cleaning mode again.

Plan Button – This button is used to set a specific time each day to automatically start the vacuum. This is also why the Clock Button is important. This button is used to set the correct time, which is what the vacuum will go by when automatically starting each day.

Spot and Edge Buttons – These are two more cleaning modes that can be very handy. The Spot Button (bottom left) allows you to put the robot directly on a spot, such as wasted salt or a spilled drink. It will clean just that spot and then stop once nothing else is detected. It’s not 100% accurate but still pretty impressive. The EdgeButton (bottom right) is for when you want it to clean just along the edge of the walls. It will go along the edge until it reaches the end and then find the next edge. It will keep doing this until you stop it.

Home Button – Finally, this is how you send it to the Charging Home Base manually. If you press the Clean Button and leave it alone, it will eventually go back to its home base once the battery gets low. However, you can stop it early by pressing this button.


We Also Recommend